Model : PC14000
Number of channel : 2
Peak total output all channels driven : 195V
Peak output voltage per channel : 195V
Max, output current per channel : 85 A peak
Max, Output power
16 ohms per ch. (all ch,s driven) : 1200W
8 ohms per ch. (all ch,s driven) : 2350 W
4 ohms per ch. (all ch,s driven) : 4400W
2 ohms per ch. (all ch,s driven) : 7000W
16 ohms Bridge per ch. : 4700W
8 ohms Bridge per ch. : 8800W
4 ohms Bridge per ch. : 14000W
2 ohms Bridge per ch. : 3)
Performance with Gain : 35 dB and VPL 195 V
THD 20 Hz – 20 kHz for 1 W : <0,1%
THD at 1 kHz and 1 dB below clipping : <0,05%
Signal To Noise Ratio : >112 dBA
Channel separation (Crosstalk) at 1 kHz : >70 dB
Frequency response (1 W into 8 ohms) at 1 kHz : >70 dB
Input impendance : 20 kOhm
Input Common Mode Rejection, CMR : 54 dB
Output impendance @ 100 Hz : 19 mOhm
Voltage Peak Limiter (VPL), max. Peak output :
VPL, selecttable per ch. (V) : 195, 170, 140, 116, 100, 80, 66, 54V
VPL, selectable when bridge (V) 1) : 390, 340, 280, 232, 200, 160, 132, 108V
Voltage Peak Limiter mode (per ch.) :Hard / Soft
Gain and Level
Amplier gain selectable (all channels) 1) : 23, 26, 29, 32, 38, 41, 44 dB
Default gain : 38 dB
Level adjustment (per ch) : Front panel potentiometer, 31 position detended from -in to 0 dB
Connectors and switches :
Input connectors (per ch.) : 3-pin XLR, electronically balanced
Output connectors (per ch.) : Neutrik Speakon or binding Post (must be specified upon order), BP only on FP 14000, FP 13000, FP 9000.
Output bridge mode per two ch.s : A+B – Ch. A is signal input source A+B C+D – Chs A and C are input source
NomadLink network : 2 × RJ45 EtherCon connector , IN and OUT
Intellgent fans (on/off) : Yes, depending on presence of output signal
Power on/off and Remote enable on/off : individual switches on front-panel
Cooling : two fans, front-to-rear alrow, temperature controlled speed Front-panel indicators
Common : NormadLink network; Power Avarage Limiter (PAL) 2j; Power on
Per channel : Signal present / High-impedance; -20 dB, -10 dB and-4 dB output Signal; Voltage Peak Limiter (VPL); Current Peak Limiter (CPL): Very High Frequency (VHF); High temperature; Fault; Mute
Power
Operating voltage, 230V / 115V nominal 4) : 130-265 V / 65-135 V
Minimum power-up voltage, 230V / 115V : 171 V / 85V
Power Avarage Limiter (PAL) 2) : Yes
Soft start/ Innush Current Draw : Yes / max. 5A
Mains connector 230 v CE: 16 A, CEE7; 115 V ETL:30 A Twist lock| FP 4000:230V CE: 16A, CEE7; 115V ETL:20 A / NEMA 5-20P
Dimensions (W/H/D) : W: 483 mm (19?, H: 88 mm (2 U), Overall D: 396 mm(15,6?, Mounting D: 358 mm (14,1?
Weight : 12 kg (26,4lbs,)
Finish : Black painted steel chassis with black painted steel / aluminium front