WMR 2000

WMR 2000

Comprehensive Characteristics
Carrier frequency range 520MHz-960MHz (depending on applicable national/regional regulations)
Frequency width 2X32MHz
Modulation method FM frequency modulation
Maximum frequency offset ±45KHz
Frequency response 50Hz-15KHz
Signal to Noise Ratio (S/N) >105dB (A)
Distortion (1KHz) <0.3%
Working temperature -10°C~55°C
Working distance 100 meters (under ideal conditions)
Waist Pack Transmitter
RF power output Maximum 30mW (depending on applicable national/regional regulations)
Transmission frequency stability <30ppm
Dynamic range ≥100dB (A)
Frequency response 50Hz-15KHz
Maximum input sound pressure 130dB SPL
Phonetic pickup head Capacitive type
Power supply 2 AA alkaline batteries (1.5V)
Receiver
Stray Suppression ≥80dB
Image Suppression ≥80dB
Sensitivity 5dBuv
Audio Output Level Balanced Output (XLR Output Jack: 250mv/600Ω)
Unbalanced Output (1/4″ output jack) 400mv/k3Ω
Working Voltage DC 12-16V
Working Current  ≤ 350ma
Handheld Transmitter
RF Power Output Maximum 30mW (depending on the applicable country code)
Transmission Frequency Stability <30ppm
Dynamic Range ≥100dB (A)
Frequency Response 50Hz-15KHz
Maximum Input Sound Pressure 130dB SPL
Microphone Pickup Dynamic Coil
Power Supply 2 AA alkaline batteries (1.5V)
Conference Transmitter
RF Power Output Maximum 30mW  (depending on the applicable country/region code)
Transmission Frequency Stability <30ppm
Dynamic Range ≥100dB (A)
Frequency Response 50Hz-15KHz
Maximum Input Sound Pressure 130dB SPL
Microphone Pickup Capacitor
Power Supply 2 AA alkaline batteries (1.5V)
3 Batteries (1.5V)
 2 (18650) batteries